IS215VPROH2BC控制器模块,提高抗干扰能力

IS215VPROH2BC控制器模块,提高抗干扰能力

GE提供创新的解决方案和服务，为世界提供必要的基础设施。GE产品广泛应用于各个行业。我们是GE的经销商，提供各种系列的模块和卡。主要产品有：模块IC693,IC695,IC697,IC698...继电保护装置,SR469,SR369,SR750, 燃机卡件IS200,IS215,IS220, IS420系列 DS200系列DS380系列，VMIVME系列CPU控制卡等

IS200CABPG1ACA is also called CABP board. This board serves as a way for the board inserted therein to interface and interact with external signals. This board provides connection with other external interfaces. These connections include power input, ISBus port, diagnostic tools, front panel instrument and front panel keyboard. This motherboard is usually installed on the innovative series motherboard rack. The rack can provide mounting points for boards inserted into IS200CABPG1ACA.

IS200CABPG1ACA is designed so that all non-board connections will not be accidentally plugged into the wrong jack. Board connections on the board tend to use different types of connections, key them separately, or have the same pin assignment, because they can be interchanged without causing any damage to the board. Only some boards can be inserted into CABP boards. A BAIA board is assigned to slot 1. The DSPX board is assigned to slot 2. Slot 3 is occupied by ACL_ board or GBIA/PBIA mods. Slot 4 is assigned to a BIC board. BPI_ or FOSA board is assigned to slot 5. E1 and E2 piercing connectors on this board are connected to GND. The plug-in connectors of E3 and E4 are connected to CCOM. J1-J12 connector on this board is an external interface connection. J13-J21 connector is the actual card slot.

IS200CABPG1ACA也称为CABP板。该板用作插入其中的板与外部信号接口和交互的方式。该板提供与其它外部接口的连接。这些连接包括电源输入、ISBus端口、诊断工具、前面板仪表和前面板键盘。该主板通常安装在创新系列主板机架上。该机架能够为插入IS200CABPG1ACA的板提供安装点。

IS200CABPG1ACA的设计使得所有非板连接不会意外插入错误的插孔。板上的板连接倾向于使用不同类型的连接，单独键控，或具有相同的引脚分配，因为它们可以互换而不会对板造成任何损坏。只有某些板可以插入CABP板。一个BAIA板被分配给插槽1。DSPX板被分配到插槽2。插槽3被ACL_ board或GBIA/PBIA mods占用。插槽4被分配给一个BIC板。BPI_或FOSA板被分配给插槽5。该板上的E1和E2刺入式连接器连接到GND。E3和E4的插入式连接器连接到CCOM。该板上的J1-J12连接器是外部接口连接。J13-J21连接器是实际的卡插槽。

IS200BPVAG1B是通用电气为Speedtronic Mark VI系列制造的PCB(印刷电路板)组件。MKVI在所有关键控制和保护参数上都有三重冗余备份，是第三个提供三重冗余控制的Speedtronic系统。MKVI中的许多模块可采用单冗余或三冗余形式，这取决于涡轮机系统的大小和复杂性。

IS200BPVAG1B设计为背板，放置在机架系统的底座中。机架系统将卡一分为二，卡的前半部分仍可从机架外侧触及。卡的后半部分被机架系统包围，插入背板的板由机架的侧面支撑。需要注意的是，机架与IS200BPVAG1B板是分开的。

IS200BPVAG1B配有21个板连接器。这些是为接受不同种类的卡而设计的。电路板的前半部分有两行输入/输出。一行二十一个，另一行二十个。这些I/o支持与插入背板的板之间的数据传输。